AEG 95300KA-MN - Manual (Page 12)

12
Operation of the cooking surface
TOUCH CONTROL sensor buttons
To operate the TOUCH CONTROL sensor buttons, place your finger flat, from
above, on the desired button until the corresponding indicator illuminates,
or extinguishes, or the desired function is performed.
For quicker adjustment leave your finger on the button until the desired
value is reached.
All entries are acknowledged by an acoustic signal.
Switching on the appliance
Switch on the appliance using the main "On/Off" button.
The "Heat Setting/Residual Heat" display fields show .
After the main "On/Off" button has been operated to switch on your apĆ
pliance, one of the cooking zones must be selected using the cooking zone
selection buttons within approx. 10 seconds. Otherwise the appliance switĆ
ches off again for safety reasons.
Switching off the appliance
Operate the main "On/Off" button to completely switch off the appliance.
After the individual cooking zones or the entire cooking surface have been
switched off, the presence of residual heat is indicated by (as in "Hot")
in the "Heat Setting/Residual Heat" display fields of the respective cooking
zones.
If all cooking zones are switched off, the appliance switches off automatiĆ
cally after a period of time.
Operating Instructions
.
.