beautypg.com

System features, Introduction, Making calls – Avaya 6400 User Manual

Page 26: Answering calls, The system features se, E 26, See "system features" o

background image

System Features

Page 26

System Features

Introduction

As well as your phones specific features, you can access a number of
system features by dialing short codes.
These instructions are for the system's default configuration. They assume
that you are using the default feature codes. It also assumes that you have
full access to all features and the public telephone network. Users with
stations that do not have the Menu

button (4406D+, 4606D+ and

TransTalk

®

MDW 9040) must activate features (those requiring additional

numbers - ie. external number, Hunt Group) via the shortcodes.

Making Calls

Internal Calls: To make a call to another extension, simply dial the
number. If the number is busy, you can use Ring Back When Free as
below:
1. Dial any digit and hang up.
2. When the extension you called is free, your phone will ring (a burst of

three rings).

3. Lift the handset and the extension is called automatically.

External calls: To make an external call, either dial the number (prefixed
by the access code if required) or use a speed dial code (contact your
system manager for a list of your speed codes).
If you hear busy tone while dialing, then the call may be barred. Your
system manager can bar certain calls, such as those to premium rate
numbers and international calls

Answering Calls

Ringing at your own extension: Simply pick up the handset; internal calls
have a single ring cadence, external calls have a double ring cadence.
When in headset mode, press the button associated with the alerting call.
Ringing at another extension: You can answer from your own phone by
using Call Pick-Up; lift your handset and dial:
- *30 to answer a call ringing anywhere.
- *31 to answer a call within your group.
- *32*201# to answer the call for a particular extension, in this example

201.

Note that if your phone rings for any longer than a specified period (15
seconds in default), any re-direction feature that you have activated, such
as voicemail or call forwarding, will come into effect.

4400, 4600, 6400 & TransTalk MDW 9040 Telephones

Page 26

IP Office

40DHB0002USAL - Issue 6 (04/25/2003)

This manual is related to the following products: