Avaya 6400 - Manual (Page 24)

DSS Key Functions Page 24
Programming Functions Against DSS Keys
Any of the functions normally accessed by pressing Menu can also be
programmed under a DSS key. This allows faster access to the function.
To add a function to a DSS key:
1. Press Menu
.
2. Using the and keys, display and then select Admin Use the and
keys to display the function you want and then press the key below that
function. Selecting Expl? explains the function names.
• For a list of the available functions see "Functions" on page 25.
3. If the function requires some parameter such as an extension or group
number you can enter it now. If you don't enter a parameter then it will
be requested when you press the DSS key during usage.
4. Press the DSS key against which you want the function programmed.
• If the key is already programmed you will see options to Repla,
Keep or Delete. Select the option required.
5. Select Cont.
6. Either select another function and program another DSS key or press
Exit .
To remove a function from a DSS key:
1. Press Menu
.
2. Using the and keys, display and then select Admin.
3. Press the DSS key against which the function is programmed.
4. Press the key below Clear and then press the DSS key again.
5. Select Delet to remove the function.
7. Press the key below Cont.
8. Either select another function to program another key or press Exit
.
4400, 4600, 6400 & TransTalk MDW 9040 Telephones Page 24
IP Office 40DHB0002USAL - Issue 6 (04/25/2003)