Alloy Computer Products POE120 Series - Manual (Page 9)

11. Technical Specifications
Standards:
IEEE 802.3u 10/100Base-TX, 100Base-FX
IEEE 802.3af Power Over Ethernet
UTP Cable: Cat. 5 cable up to 100m
Fibre Cable: 50/125, 62.5/125 or 100/140 µm multi mode
8.3/125, 8.7/125, 9/125 or 10/125 µm single mode
Power Reception
Support: “Endpoint” Via TP Pins 1, 2, 3 and 6
”Midspan” Via TP pins 4, 5, 7 and 8
LED Indicators: Power, POE, TP LNK/ACT, 100, FX LNK/ACT,
FDX/COL
Data Transfer Rate: 100Mbbps – 148,800pps
10Mbps – 14,880pps
Flow Control: IEEE 802.3x compliant for Full Duplex
Backpressure flow control for Half Duplex
Power Requirements: 60mA@-48VDC from IEEE 802.3af PSE or POE
Injector
Ambient Temperature: 0º to 50º C
Humidity:
5% to 90%
Dimensions: 26.2(H) x 70.3(W) x 94(D) mm
Complies with C-Tick, FCC Part 15 Class A and CE Mark