beautypg.com

Chapter 3, 3 sata configuration, Sb sata configuration onchip sata channel [enabled – Asus SABERTOOTH 990FX User Manual

Page 79: Sata port1-port4 [ahci, Configuration options: [disabled] [disabled

background image

ASUS SABERTOOTH 990FX

3-17

Chapter 3

3.5.3

SATA Configuration

Main

Ai Tweaker

Advanced

Monitor

Boot

Tool

Exit

Options for SATA Configuration.

Back

Advanced\

SATA Agent Configuration >

UEFI BIOS Utility - Advanced Mode

SATA Configuration

SATA6G_1

Not Present

SATA6G_2

Not Present

SATA6G_3

Not Present

SATA6G_4

Not Present

SATA6G_5

Not Present

SATA6G_6

Not Present

> SB SATA Configuration

SB SATA Configuration
Onchip SATA Channel [Enabled]

Configuration options: [Disabled] [Disabled]

SATA Port1-Port4 [AHCI]

Allows you to set the SATA configuration. This item appears only when you set the OnChip

SATA Channel item to [Enabled].

[IDE]

Set to [IDE] when you want to use the Serial ATA hard disk drives as

Parallel ATA physical storage devices.

[RAID]

Set to [RAID] when you want to create a RAID configuration from the

SATA hard disk drives.

[AHCI]

Set to [AHCI] when you want the SATA hard disk drives to use the

AHCI (Advabced Host Controller Interface). The AHCI allows the

onboard storage driver to enable advanced Serial ATA features that

increases storage performance on random workloads by allowing the

drive to internally optimize the order of commands.

This manual is related to the following products: