Chapter 3, Ecc configuration, Rs780d configuration – Asus M4A78-E User Manual
Page 78: Internal graphics configuration
3-20
Chapter 3: BIOS setup
Chapter 3
ECC Configuration
ECC Mode [Disabled]
Disables or sets the DRAM ECC mode that allows the hardware to report and correct
memory errors.
[Disabled] Disables the DRAM ECC mode.
[Basic]
Set to [Basic] to adjust ECC mode automatically.
[Good]
Set to [Good] to adjust ECC mode automatically.
[Super]
Set to [Super] to adjust the DRAM BG Scrub sub-item manually.
[Max]
Set to [Max] to adjust ECC mode automatically.
[User]
Set to [User] to adjust all the subitems manually.
RS780D Configuration
Set the level of ECC
protection. Note: The
‘Super’ ECC mode
dynamically sets the
DRAM scrub rate so
all of memory is
scrubbed in 8 hours.
ECC Configuration
ECC Mode
[Disabled]
DRAM ECC Enable
[Disabled]
DRAM SCRUB REDIRECT
[Disabled]
4-Bit ECC Mode
[Disabled]
DRAM BG Scrub
[Disabled]
Data Cache BG Scrub
[Disabled]
L2 Cache BG Scrub
[Disabled]
L3 Cache BG Scrub
[Disabled]
BIOS SETUP UTILITY
Advanced
Internal Graphics Conf
NorthBridge2 Chipset Configuration
Internal Graphics Configuration
PCI Express Configuration
Primary Video Controller
[PCI-E]
BIOS SETUP UTILITY
Advanced
Internal Graphics Configuration
Internal Graphics Configuration
Internal Graphics Mode
[UMA+SidePort]
UMA Frame Buffer Size
[Auto]
SidePort Clock Speed
[DDR2-800MHz]
SidePort Voltage
[Auto]
GFX Engine Clock Override
[Disable]
Surround View
[Auto]
BIOS SETUP UTILITY
Advanced
Options
Disable
UMA
SidePort
UMA+SidePort