Asus Star Ice - Manual (Page 4)

EnglishEnglishEnglishEnglishEnglish
4 4 4 4 4
3. Before you proceed
Take note of the following precautions before you install the Star Ice CPU cooler.
• Make sure to unplug the system power plug from the electrical socket before
you install or remove the CPU cooler.
• Install the CPU and the memory module(s) before you install the CPU cooler.
• Remove the chassis fan or the air duct on the chassis side panel to clear the air
path, if necessary.
• Install the Star Ice cooler on the motherboard before installing the
motherboard to the chassis.
• Have all components ready before installing the CPU cooler.
• Keep the parts list on hand when installing the CPU cooler.
4. Installation procedures
4 . 1 4 . 1 4 . 1 4 . 1 4 . 1 Smart clip assembly Smart clip assembly Smart clip assembly Smart clip assembly Smart clip assembly
The multi-directional smart clip assembly holds the CPU cooler in place and lets you
direct the airflow to the chassis rear panel air vents. The smart clip is composed of
two U-bars with screw holes for Intel
® Pentium ® 4 LGA775/478-pin or K8 CPU, and an
H-bar that connects the two U-bars. Refer to the illustration on the next page.