American Dryer Corp. ADG-330D - Manual (Page 7)

3
SECTION I
ROUTINE MAINTENANCE
A. CLEANING
A program and/or schedule should be established for periodic inspection, cleaning, and removal of lint from
various areas of the dryer, as well as throughout the ductwork system. The frequency of cleaning can best be
determined from experience at each location. Maximum operating efficiency is dependent upon proper air
circulation. The accumulation of lint can restrict this airflow. If the guidelines in this section are met, an ADC
dryer will provide many years of efficient, trouble free and most importantly safe operation.
WARNING: LINT FROM MOST FABRICS IS HIGHLY COMBUSTIBLE. THE
ACCUMULATION OF LINT CAN CREATE A POTENTIAL FIRE HAZARD.
WARNING: KEEP DRYER AREA CLEAR AND FREE FROM COMBUSTIBLE
MATERIALS, GASOLINE, AND OTHER FLAMMABLE VAPORS AND
LIQUIDS.
NOTE: Suggested time intervals shown are for average usage, which is considered six (6) to eight (8)
operational (running) hours per day.
DAILY (beginning of each work shift)
Clean lint from baskets (tumblers).
Inspect lint screen(s) and drawer(s) for damage and replace if torn.
WEEKLY
Clean lint accumulation from around microprocessor temperature sensor probes and sensor bracket assemblies.
90 DAYS
Remove lint from air vents and surrounding area.
IMPORTANT: Lint accumulation will restrict the airflow over the motor(s), causing overheating and
irreparable motor damage. Motor failure due to lint accumulation will VOID THE
WARRANTY.