Advantech PPC-L128T - Manual (Page 23)

15 PPC-L128T User Manual
Chapter 3
H
ardware
Installation
and
Upgrading
3.3 Installing the battery pack
1. Pull up the battery door cover on the right bottom of PPC-L128T.
2. Put the battery pack in, and then connect the battery cable to battery connector
in the PPC-L128T. Make sure the red wire corresponds to Pin 1 on the connec-
tor.
3. Close the battery door cover.
Figure 3.2 Installing the battery pack
Battery door cover
Red color (pin1)
Battery pack
Battery cable