Actiontec electronic GEU404000-01 - Manual (Page 41)

38
Actiontec Wireless Ready Cable/DSL Router User Manual
VPN Pass Through
Selecting VPN Pass Through in the “Custom Setup” screen generates the “ VPN
Pass Through” window. To allow Virtual Private Networking ( VPN) using
I P Sec/ L2TP (with multiple, client-initiated pass-through sessions), click On. Note
that VPN using PPTP is always on by default.
Port Forwarding
Selecting Port Forwarding in the “Custom Setup” screen generates the “Port
Forwarding” screen. Port forwarding allows certain programs to bypass the
Router’s built-in firewall to access parts of the network (for hosting a Web or ftp
server, for example). To use port forwarding, select one of the Internet services list-
ed, activate it by clicking on its “On” radio button, then enter the IP address of the
computer on the network receiving the selected service.
Advanced Port Forwarding Settings
Clicking Advanced Port Forwarding Settings generates the “Advanced Port
Forwarding” screen. This screen allows the user more control over port forwarding
settings. To configure:
1. Enter the IP port range in the “ IP Port Range” text boxes. (If more than 10
ports are needed, Actiontec recommends using DMZ Hosting. See “ DMZ
Hosting.”)