Actiontec electronic GEU404000-01 - Manual (Page 22)

19
Chapter 2 Setting Up the Router
4. In the next window, read the instructions. Plug the thin, rectangular end of
the Purple Cable (USB) into a USB port on the front or back of the comput-
er, then click Next.
☞
Note: A USB port is shaped like a thin rectangle about 1/4 inch
by 1/2 inch, and may be vertically or horizontally oriented.
5. Ensure that the USB light on the Router glows steadily green, as shown in the
following window, then click Next.
6. The following window appears while the Router is being configured. Wait
until the process is completed.