Installation, 2 closing the door, 1 positioning – Electrolux ERW3313AOX User Manual
Page 13: 2 electrical connection
At the same time, free the
middle hook and slide off the
cover in the direction of the
arrows.
Replace the used lamp with
a new lamp of the same type
and specifically designed for
household appliances and
having the same characteris-
tics.
Install the lamp cover.
Connect the mains plug to
the mains socket.
Open the door. Make sure
that the lamp comes on.
5.2 Closing the door
1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to
"Installation".
3.
If necessary, replace the defective door
gaskets. Contact the Service Center.
6. INSTALLATION
6.1 Positioning
WARNING!
If you are discarding an old appli-
ance that has a lock or catch on
the door, you must ensure that it is
made unusable to prevent young
children being trapped inside.
The appliance shall have the plug
accessible after installation.
Install this appliance at a location where the
ambient temperature corresponds to the
climate class indicated on the rating plate
of the appliance:
Cli-
mate
class
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
6.2 Electrical connection
Before plugging in, ensure that the voltage
and frequency shown on the rating plate
correspond to your domestic power sup-
ply.
The appliance must be earthed. The power
supply cable plug is provided with a con-
tact for this purpose. If the domestic power
ENGLISH
13