Electrolux EI30EW45KB - Manual (Page 21)

21 Setting your Preferences
Setting continuous bake or
12 hour energy saving
The oven control has a factory preset built-in
12 Hour Energy Saving feature that will shut off
the oven if the oven control is left on for more
than 11 hours and 59 minutes. The oven can be
programmed to override this feature for Continuous
Baking.
Changing between 12 hour energy saving and
continuous bake
1. Press USER PREF until you get to the E S
menu page.
2. Press lO or HI to toggle the energy saving
setting on and off.
3. Press START to accept the changes and go
back to user preferences menu display.
4. Press CANCEl when finished to get back to
the standard oven display.
Audio control
The Audio Control feature allows the oven
control to be operated without sounds or beeps
whenever necessary. If desired the control can be
programmed for silent operation and later returned
to operating with all the default sounds and beeps.
The volume of the beeps can also be adjusted.
To change the audio mode or audio volume
1. Press USER PREF until you get to the AUd
menu page.
2. Press lO or HI to toggle between the available
volume settings. AUd 5 for the highest volume
setting to AUd 1 for the lowest volume. AUd
OFF to disable the beeps.
3. Press START to accept the changes and go
back to user preferences menu display.
4. Press CANCEl when finished to get back to
the standard oven display.
Adjusting oven temperature
The temperature in the oven has been pre-set at
the factory. When first using the oven, be sure to
follow recipe times and temperatures. If you think
the oven is too hot or too cool, the temperature in
the oven can be adjusted. Before adjusting, test a
recipe by using a temperature setting that is higher
or lower than the recommended temperature. The
baking results should help you to decide how much
of an adjustment is needed. Each oven can be
individually adjusted.
To adjust the oven temperature
1. Press USER PREFERENCES until you get to
the UPO menu page.
2. If you want to adjust the temperature in the
lower oven, press USER PREFERENCES
again. UPO will appear in the lower display.
3. Enter the temperature by pressing the lO or HI
pads. The temperature can only be adjusted by
± 35°F.
4. Press START to accept the changes and go
back to user preferences menu display.
5. Press CANCEl when finished to get back to
the standard oven display.
Re-setting to default factory
settings
The oven control can be set to return to its original
factory settings. This includes: Setting the Clock
ON/OFF to ON, Setting the clock display mode to
12h, Display mode to Fahrenheit, Setting the oven
temperature adjustment to zero, Setting audio level
to 5 and Enabling the 12h energy saving mode.
Reseting the control also erase the My Favorite
recipes.
To reset the oven control to its original settings
1. Press USER PREF until you get to the rSt no
menu page.
2. Press lO or HI to select yES.
3. Press START to reset to default factory
settings.