American DJ DJ Scan/RG - Manual (Page 5)

Due to fog residue, smoke, and dust, cleaning the internal and external optical lenses must be carried out periodically to optimize light output. 1.
Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2.
Use a brush to wipe down the fan grill.
3.
Clean the external optics with glass cleaner and a soft cloth every 20
days. Situation may very. If used heavily in clubs with lots of
fog, cleaning may be required more often.
4.
Clean the internal optics with glass cleaner and a soft cloth every 30-60
days.
5.
Always
be
sure
to
dry
all
parts
completely
before
plugging
the
unit in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue, dust, dew).
©
American DJ Supply
®
- www
.americandj.com - DJ Scan/RG™ Instruction Manual Page 10
©
American DJ Supply
®
- www
.americandj.com - DJ Scan/RG™ Instruction Manual Page 9
DJ Scan/RG™
Cleaning
DJ Scan/RG™
Lamp Replacement
Lamp
Replacement:
Caution!
Never
open
the
unit
when
in
use.
Always
disconnect
the
main
power
before
attempting
to
replace
the
lamp. 1.
Be
sure
to
follow
the
proper
procedures
when
handling
halogen
bulbs.
2.
Lamp replacement has been made simple by incorporating the use of a removable lamp tray and thumb screws.
3. Loosen the thumb screw on rear cover
.
4. Remove the tray. 5. Remove and replace the bulb. 6. Reassemble. Remember to always replace with the exact same type lamp and fuse, unless otherwise specified
by an authorized
American DJ
service technician.
The DJ Scan/RG™ may be controlled by a wide range of controllers; ie. Show Designer™, DMX Operator
,™
Scene Setter™ or by the DJ
MINI/C basic controller
.
MINI/C featur
es:
DJ Scan/RG™
Optional Remote
The MINI/C controller may be
purchased separately allowing you to
control the main unit, and any others connected to it, while it is in stand alone mode.
Y
ou can set the unit to blackout. If you have more than
one unit, make sure the remote control is plugged into the first unit in the daisy chain.
The remote control will not have any ef
fect if the unit
is in DMX mode. When the unit is in blackout mode, the light will come on next to the blackout button.
30 ft. cable
Stand by (Black out)