American DJ HMI 575TM - Manual

American DJ®
LOS ANGELES, CA. 90058
Model: Tempest ll/ HMI 575 ™
SPECIFICATIONS:
Lamp: ZB-HMI 575
Power: 240V 50Hz/60Hz
Optics: High Quality Glass Lenses
Ventilation: Fan Cooled
Working Position: Any
Weight: 59 lbs.
Size: 27.5” x 27.5” x 8.5”
HALOGEN LAMP WARNING!
This fixture is fitted with halogen lamps
which are highly susceptible to damage if
improperly handled. Never touch lamp
with bare fingers as the oil from your
hands will shorten lamp life. Also, never
move fixture until lamp has had ample
time to cool. Remember, lamps are not
covered under warranty conditions.
Thank you for purchasing this
Am er i ca n D J®
p roduct. For your
convenience this lighting effect has
been lamped and is ready to be used,
t h e re is no assembly re q u i re d .
Please read the following
i n s t ructions before installing or
using your new unit.
Operating Instructions:
Unit is ready to be hung or set on the ground. After
plugging in unit, the lights will react to the music via the
sound active internal microphone. Adjust the sound
activation knob on the back of the unit for desired music
sensitivity.
Product Description:
The Tempest ll/HMI 575™ features the ZB-HMI575,
discharge lamp! A centerpiece effect by American
DJ®, featuring 6 separate mirror units creating s o l i d
and moonflower type beams that rotate and sweep
across a room. The Tempest ll/575™ has a low profile
design for clubs with low ceilings, producing 6 dichroic
colors plus white. Built-in programs; gives a mini
Terminator type effect. Programs can be selected by a
DMX 512 Controller.p Fan cooled. 30 ft. remote with
blackout feature.
To replace lamp; unscrew knobs on lamp
replacement hatch on the center front of the
fixture. Replace bulb; reassemble.
For service contact your American DJ® dealer.
C a u t i o n ! Always disconnect from main
power before replacing lamps or servicing unit.
Remember to always replace with same lamps
and fuses.
American DJ
®
Tempest ll/
HMI575 ™
With master/slave capabilities!
User Instructions