American DJ DJ Scan/RG - Manual

User Instructions
American DJ
4295 Charter Street
Los Angeles,
CA 90058
www
.americandj.com
DJ Scan/RG™
Intr
oduction
©
American DJ Supply
®
- www
.americandj.com - DJ Scan/RG™ Instruction Manual Page 2
Introduction:
Congratulations and thank you for purchasing the DJ
Scan/RG™ by
American DJ
® , one of the finest pieces of its kind on the
market today!
The DJ Scan/RG™ is a great inexpensive, light weight,
intelligent fixture. Due to it’
s physical specifications, it’
s
a great piece
for mobile DJ’
s, roller rinks, small clubs, bars, and bowling centers.
When used in multiples of two or more, these units create an ef
fect that
rivals that of units that can cost up to three times the price.
The DJ
Scan/RG™ was designed to run in Master/Slave mode but can be used with any universal DMX-512 controller
.
Customer Support:
American DJ
® provides a toll free customer sup-
port line, to provide set-up and installation help and to answer any question should you encounter problems during your set up or initial operation.
Y
ou may also visit us on the web at www
.americandj.com
for any comments or suggestions.
T
oll free customer service hours are
Monday through Friday 9:00 a.m. to 5:30 p.m. Pacifi
c Standard
T
ime.
V
oice:
(800)
322-6337
Fa
x:
(323) 582-2610
E-mail:
[email protected]
W
arning!
To
prevent or reduce the risk of electrical shock or fi
re, do
not expose this unit to rain or moisture. Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war- ranty. In the unlikely event your unit may require service please contact American DJ
® customer support.
Do not discard the shipping carton in the trash. Please recycle when ever possible
.
Improvements and changes in specifi
cations and design to this
manual and unit may be made at any time without prior notice.
HALOGEN LAMP
W
ARNING!
This fixture is fitted with a halogen lamp which is highly susceptible to damage if improperly handled. Never touch the lamp with your bare fingers
as
the
oil
from
your
hands
will
shorten
the
lamp
life.
Never
install, mount, or place this fixture in areas prone to heavy vibration. Also, never move the fixture until the lamp has had ample time to cool. Remember
, lamps are not covered under warranty conditions.
Revised 8/01