Asus P5GD1-VM User Manual

Page 72

2 - 2 8

C h a p t e r 2 : B I O S s e t u p

2.5.5

APM Configuration

APM Configuration

Restore on AC Power Loss

[Power Off]

Power On By RTC Alarm

[Disabled]

Power On By External Modems

[Disabled]

Power On By PCI Devices

[Disabled]

Power On By PS/2 Keyboard

[Disabled]

Keyboard Wakeup Password : Not Installed

Power On By PS/2 Mouse

[Disabled]

Restore on AC Power Loss [Power Off]

When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]

Power On By RTC Alarm [Disabled]

Allows you to enable or disable RTC to generate a wake event. When this
item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC
Alarm Minute, and RTC Alarm Second appear with set values. Configuration
options: [Disabled] [Enabled]

Power On By External Modems [Disabled]

This allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. Configuration options: [Disabled] [Enabled]

The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system
power on.

to select
whether or not to
restart the system
after AC power loss.

Power On By PCI Devices [Disabled]

When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]