Audiovox ACC-52 - Manual (Page 8)

4
2 Attach bracket (L) and bracket (R) to each side of the
unit, using the hexagonal bolts with washer base
(M5 x 10).
Mount the unit in place, using four self-tapping screws
(M5 x 12).
Use RTV (silicone sealer) on screw threads or around
the holes to prevent moisture intrusion.
Set the left and right anti-vibration springs to position
"45°".
Determine the mounting location, and drill four mount-
ing holes.
PROCEDURE FOR 45° ANGLE INSTALLATION
NOTE: If the anti-vibration spring position has been changed and verified for 45° angle
1
Never mount the unit near the fuel tank.
8
Bracket (L)
Bracket (R)
Hexagonal bolt
with washer base (M5 x 10)
Drill holes 4mm in diameter.
Bracket (R)
Self-tapping screw (M5 x 12)
NOTE: Use seals (A) to cover unused
mounting holes on sides of unit.
Bracket (L)
position "45°"
45 °
H
V
45
3