Placing documents, Configuring the scanning method – Canon imageFORMULA P-215 Scan-tini Personal Document Scanner User Manual
Page 12
11
A If you want to scan a multi-page document in batches, click [ON] for
[Enable continuous scanning]. This manual describes scanning
operations with this set to [OFF]. For details on operations with this
set to [ON], refer to the User Manual stored on the supplied Setup
disc.
B If you want to configure scanning conditions, click [OFF] for [Scans
in the full auto mode]. (See p. 12)
4. Placing Documents
Scannable Documents
Width: 50.8 mm to 216 mm (2" to 8.5")
Length: 70 mm to 356 mm (2.756" to 14")
Thickness: 52 to 128 g/m
2
(14 to 34 lb bond) 0.06 mm to 0.15 mm
(0.0024" to 0.0059")
Depending on the document, scanning may result in a paper jam
or malfunction. For details, refer to the User Manual.
Press the document beneath the tabs.
You can place up to 20 sheets at one time.
Do not go past the
mark on the document
guides.
Fan the pages before placing them.
Place the scanning side of
the documents face down
into the scanner.
Adjust the document
guides to the edges of the
documents.
Place the top of the
documents pointing down.
(with page edges slightly
askew)
5. Configuring the Scanning Method
0-00-P-215_RG_EN.book Page 11 Wednesday, August 24, 2011 11:45 AM