Canon Speedlite Transmitter ST-E2 - Manual (Page 6)

The hot shoe on t h e EOS 650,
EOS 620, EOS 750, a n d EOS
850 will not couple w i t h t h e
lock pin. The
can still be
attached to these cameras, but
it cannot be locked onto the hot
shoe.
(3) Turning On the Power
Turn the switch to I
The main switch has the follow-
ing positions:
: Turns
I : Turns on the
HOLD : T h e s e t t i n g s which
were set a t the I switch position
arc frozen. All transmitter con-
trols t h e t e s t
sion button a r e disabled. This
prevents inadvertant alteration
of transmitter settings.
When transmission is possible,
the pilot lamp lights in red and
the
5 icon lights in the camera
viewfinder.
When the icon lights in the
camera viewfinder, it indicates
that the ST-E2 is able to trans-
mit. When Speedlite is
rechareed and readv to fire. its
beam blinks.
If t h e is on and not
u s e d for 90 t h e
(Save Energy) feature takes
effect a n d t u r n s off t h e
power automatically to save
b a t t e r y power. The ST-E2
t u r n s back on when t h e
shutter button or test trans-
mission button is pressed.
With a Type A camera
3, EOS Elan EOS
EOS G,
EOS IX. EOS
equipped with E-ITL, the
E-ITL indicator lights.
COPY