Canon Speedlite Transmitter ST-E2 - Manual (Page 15)

Applications
Even with a wireless multi-flash system, you can use high-speed sync
flash), FE lock, and flash exposure compensation in the same way
a s with a camera-attached
Wireless high-speed sync
flash)
Wireless F E lock
After setting t h e wireless single- After setting t h e wireless
or multi-flash setup, just s e t t h e o r multi-flash s e t u p , j u s t p r e s s
high-speed sync button to t h e c a m e r a ' s FEL b u t t o n t o
This enables wireless high- enable wireless FE lock.
speed sync. T h e slaves need not
be touched at all.
The ST-E2 can transmit wireless signals only toward the front. Therefore,
the slaves cannot be positioned behind the camera. Otherwise, they will
not be able to pick up the wireless control signals. However, with
Off-Camera Shoe Cord 2 (sold separately), the ST-E2 can be positioned
away from the camera and face any direction for wireless transmission.
Flash exposure compensation
Flash exposure
can be set with the camera.
manual flash
Wireless manual flash can be
by
the slave to single-slave
or manual flash
flash
W i r e l e s s r e p e a t i n g f l a s h c a n be
used when the slave has been set to
or flash
F o r s e e t h e
COPY