Handling paper, Handling rolls, Loading rolls on the roll holder – Canon imagePROGRAF iPF6400 User Manual
Page 9
Handling Paper
Handling Paper
Handling rolls
Handling rolls
Loading Rolls on the Roll Holder
Loading Rolls on the Roll Holder
When printing on rolls, attach the Roll Holder to the roll.
Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes
equipped with the 2-Inch Paper Core Attachment installed.
For borderless printing on A1 (594 mm) or A2 (420 mm) rolls, attach the included Spacer for Borderless Printing to
the Roll Holder.
Using Rolls with a 2-inch Paper Core
Using Rolls with a 3-inch Paper Core
Holder Stopper
Roll Holder Side
Holder Stopper
Roll Holder Side
For 2-inch paper cores
No Attachment Needed
For 3-inch paper cores
3-Inch Paper Core Attachment
Caution
•
Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll may cause
injury.
Important
•
When handling the roll, be careful not to soil the printing surface. This may affect the printing quality. We recommend
wearing clean cloth gloves when handling rolls to protect the printing surface.
•
Use scissors or a cutting tool to cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise, it
may cause feeding problems and affect the printing quality. Be careful not to cut through any barcodes printed on the
roll.
•
Align the edges of the paper on both ends of the roll. Otherwise, it may cause feeding problems.
Note
•
For details on supported sizes and types of rolls, see Paper Sizes or the Paper Reference Guide. (See "Paper Sizes.")
→User's Guide
(See "Types of Paper.")
→User's Guide
•
To view instructions as you attach the Roll Holder, press the Navigate button. (See "How to View Instructions with Navi-
gate.")
→User's Guide
iPF6400
Loading Rolls on the Roll Holder
Handling Paper
Handling rolls
9