Canon PowerShot ELPH 150 IS - Manual (Page 179)

179
ç Contents ç Chapter Contents
Disabling Eye-Fi Transfer
Configure the setting as follows to disable Eye-Fi transfer by the
card, if necessary.
z z
Press the <
n> button,
choose [Eye-Fi Settings] on
the [
3] tab, and then press the
<
m> button.
z z
Choose [Eye-Fi trans.], and
then choose [Disable].
•
[Eye-Fi Settings] is not shown unless an Eye-Fi card is
in the camera with its write-protect tab in the unlocked
position. For this reason, you cannot change settings for
an inserted Eye-Fi card if the write-protect tab is in the
locked position.