Canon EOS Rebel SL1 18-55mm IS STM Lens Kit - Manual (Page 15)

14
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
2 Specify the color you want to adjust.
 Click the [ ] button and then click the color you want to
adjust on the image.
 The selected color is displayed as an adjustment point [ ] on
the color wheel.
Click
Click
3 Determine the range of effect for the color you want
to adjust.
 The range of effect for hue, saturation, and luminosity can be set
within the limits below.
Color of the adjustment point selected in step 2
Range of upper and lower limit of saturation
Drag to move towards the center or towards
the outer perimeter
Range of upper and lower limit of hue
Drag to move along the circumference
Range of
upper and
lower limit of
luminosity
Drag to
move up or
down
Luminosity level of the adjustment
point selected in step 2
Within the frame is the range of effect
Setting Range
Hue 30 - 180 degrees
Saturation 30 - 100
Luminosity 30 - 100
COP
Y