Canon VB-C60 - Manual (Page 25)

25
2
System Installation Example
Reference
/
“Chapter 4 Register Camera Server and Set Recording Schedule” in
Administrator's Manual
Select a camera server to register, and then
click Add Camera Server.
The Add Camera Server dialog box is
displayed.
7
Check that all of the camera servers that you
are using have been registered successfully in
the right list of the screen.
11
Click Save Changes .
The registered camera information is saved.
12
Configure the following settings in the Add
Camera Server dialog box.
• Enter the “User Name” and “Password”, and
then click Connect. Make sure that the live
view is displayed in the Preview window.
• Enter the “Camera Name”, and select the
“Location” and “Zone” of the camera.
• Click Start Control, and adjust the viewing
angle of the camera.
8
Click OK .
Now, the camera server has been registered. The registered camera server
information is displayed in the right list of the screen.
9
Repeat step 6 to 9 to register other camera servers, if necessary.
10
VK-Lite Installation
COP
Y