Canon VB-C60 - Manual (Page 19)

19
System Installation Example
2
Step 1: Preparation
Calculate how much free hard disk space will be required for the storage server from the
recording conditions to ensure that the system can operate stably.
The amount of hard disk space required can be calculated using the following formula.
The amount of free hard disk space required is therefore over 300 GB. However, this value
does not include the space required in the system area.
Required free hard disk space
= No. of cameras x Video data size x Recording frame rate x Video retention period
(sec.)
= 4 x 50 x 1 x (60 x 60 x 24 x 14)
~
~ 291000000 B
~ ~ 300 GB
Note
Do not use an external hard drive to store recorded video data. The video may not
be recorded properly or the data may be corrupted.
Reference
/
“System Design Concept” in Administrator's Manual (P.28)
Step 2: Camera Server Installation and Setup
Configure initial camera server settings, such as the IP address setting.
Refer to
Start Guide for details of initial camera server settings.
Tip
When you use presets and preset tours, it is recommended to complete
camera server settings in advance, so that you can build the system more
efficiently.
Reference
Initial camera settings
/
Start Guide
Preset settings
/
“Preset Setting Tool” in Operation Guide (P.2-18)
VK-Lite Installation
COP
Y