Canon Macro Twin Lite MT-24EX - Manual (Page 23)

21
You can adjust the flash ratio of flash tubes/heads A and B or fire only
one of the flash tubes/heads. This can create shadows on the subject to
give a more sculptural look. The flash ratio can be set in half-stop
increments as follows: 1:8 - 1:1 - 8:1 (13 settings)
1
Select <yl>.
Press the button to display
.
2
Set the flash ratio.
Press or to select from
1:8 - 1:1 - 8:1. The extreme left or
right setting will fire only one of the
flash tubes/heads.
X : Only will be fired.
: Only will be fired.
mn Setting the Flash Ratio
A:B = 1:1 A:B = 4:1 Only flash tube/head A Only flash tube/head B
Since the exposure will be controlled automatically, there is no need to
calculate the exposure.
If the flash mode is , see page 27.
MR14_MT24_02.fm Page 21 Tuesday, December 20, 2005 4:36 PM