Canon Macro Twin Lite MT-24EX - Manual (Page 10)

8
To illuminate the LCD panel, press the button.
The items actually displayed depend on the current settings.
Pressing the button turns on the
focusing lamp for about 20 sec. to assist focusing
in low light. Press the button again to
turn off the focusing lamp. Note that if you take the
picture while the focusing lamp is lit,
underexposure may result.
LCD Panel
Focusing Lamp
Flash exposure compensation amount
FEB compensation amount
Manual flash output level
Flash exposure
compensation
*
E-TTL (II)/TTL
autoflash
Manual Flash
Flash tube/head ID
(A, B)/Slave ID (C)
Flash ratio
Flash tube/head
A firing
Flash ratio scale
Manual flash output scale
for A, B, and C
Flash ratio
FEB
Second-curtain sync
High-speed sync
(FP flash)
Channel
Custom Function
Flash tube/head
B firing
FEB status
Slave C flash exposure
compensation amount
Manual flash output for A, B, and C
Custom Function No.
* will be displayed on the LCD panel even if the camera is
compatible with E-TTL II.
MR14_MT24_00.fm Page 8 Tuesday, December 20, 2005 4:35 PM