Canon Speedlite Transmitter ST-E3-RT - Manual (Page 25)

23
Wireless Settings
The color of the lamp changes depending on the transmission
status of the master unit and the slave unit.
You can save the wireless settings and recall the settings later.
1
Press function button 4.
Press function button 4 to display
.
2
Save or load the settings.
Press function button 3 .
[Save]
Press function button 1 .
X The settings are saved (stored in the
memory).
[Load]
Press function button 2 .
X The settings that were saved are set.
About the <D> Lamp
Color Status Description Action
Green Lit
Transmission
OK
–
Red
Lit Not connected Check the channel and ID
Blinking
Too many units
Master units + slave units =
16 units or less
Error Turn the power off and on again
About the Memory Function
If the transmission channels of the master unit and slave unit are
different, the slave unit does not fire. Set both to the same number, or set
both to “AUTO”.
If the wireless radio IDs of the master unit and slave unit are different, the
slave unit does not fire.
COP
Y