Ariens 939 SNO-THRO 939001 - Manual (Page 32)

10 - 32
10.Before re-assembling gear case:
a. Clean mating surfaces of gear case.
b. Apply Loctite gasket to cleaned surface.
c. Allow to cure for 24 hours.
d. Make sure the flats on the bushings are in their
proper places.
11.Reassemble gear case.
After assembly is complete you should be able to
turn input shaft freely.
12.Fill gear case with lubricating oil (Ariens L-2, P/N
00008000):
a. Remove filler plug.
b. Fill gear case with oil.
c. With machine sitting level, check oil level.
Lubricating oil should be even with filler plug
hole.
NOTE: Inserting a wire into the hole may be necessary
to check level. Over-lubricating will not damage the
gear case.
Service Parts List
Order the following parts through your Dealer:
Part No. Description
00036800 Ariens Hi-Temp Grease (3, 3 oz.
cartridges)
21533400 Spark Plug (939001, 002)
21533500 Spark Plug (939300)
07200108 Impeller Belt
07200109 Stretch Fit Traction Belt
53200500 Shear Bolts