Brother PT-2470 - Manual (Page 60)

50
VALUE OUT OF
RANGE!
• This message appears if the
value entered while setting
the Margin, Length, and
Block Length function is not
within the allowable range.
• This message appears if the
specified characters cannot
be found in the database.
• This message appears if the
values for the blocks,
records or fields to be
printed is not within the
allowable range.
• Type in a value that is within
the allowable range.
BAR CODE
TOO LONG!
• The message appears if the
length of the bar code is
longer than 22 cm when
pressing
p.
• Reduce the width of the bar
code.
OK TO REDUCE
THE BLOCK NO.?
• The message appears if you
select the PANEL2 Label
Type mode, and when the
number of the desired blocks
is less than that of the text
mode, the number is reduced.
• Press
n to reduce.
Press
b to set the same or
the more numbers of the
blocks.
BLOCK NO. CHANGE
CLEAR TEXT?
• The message appears when
changing from a different
Label Type mode to the
PANEL2 Label Type mode
and the current block number
is different from the
previously used block
number.
• Press
n to use the
PANEL2 Label Type mode.
All text is cleared.
• Press
b to select a
different Label Type mode.
Error Message Cause Solution
PT2470uk.book Page 50 Friday, August 20, 2010 3:14 PM