Brother MFC-9440CN - Manual (Page 9)

Setting Up the Machine
7
Warning
• The machine must be grounded using a 3-prong
plug.
• Since the machine is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power cord connected to
your machine when you connect it to a telephone
line. Similarly, you can protect yourself when you
want to move your machine by disconnecting the
telephone line first and then the power cord.
Note
If you are sharing one phone line with an external
telephone, connect it as shown below.
Note
If you are sharing one phone line with an external
telephone answering device, connect it as shown
below.
Please set the receive mode to
External TAD.
For more details, see “Connecting an
external TAD” in Chapter 7 of the User’s
Guide.
5 Setting the date and time
The machine displays the date and time, and if you
setup the station ID, it will add it to each fax you send.
1
Press Menu.
2
Press 0.
3
Press 2.
4
Enter the last two digits of the year on the dial
pad, and then press OK.
Date&Time
Year:2007
(e.g. Enter 0, 7 for 2007.)
5
Enter the two digits for the month on the dial
pad, and then press OK.
Date&Time
Month:03
(e.g. Enter 0, 3 for March.)
6
Enter the two digits for the day on the dial pad,
and then press OK.
Date&Time
Day:25
(e.g. Enter 2, 5.)
7
Enter the time in 24-hour format on the dial
pad, and then press OK.
Date&Time
Time:15:25
(e.g. Enter 1, 5, 2, 5 for 3:25 P.M.)
8
Press Stop/Exit.
Note
If you make a mistake, press Stop/Exit to start
from step 1.