Brother DZ2750 - Manual (Page 73)

71
3
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
Fagoting
Stitching across an open seam is called “fagoting”. It
is used on blouses and children's clothing. This stitch
is more decorative when thicker thread is used.
a
Use an iron to fold the two pieces of fabric
along their seams.
b
Baste the two pieces of fabric, separated by
about 4.0 mm (3/16 inch), onto thin paper or
a sheet of water-soluble stabilizer.
• If you draw a line down the middle of the
thin paper or water-soluble stabilizer,
sewing is easier.
a Thin paper or water soluble stabilizer
b Basting stitching
c 4 mm (3/16 inch)
c
Attach zigzag foot “J”.
d
Select stitch or .
e
Set the stitch width to 7.0 mm (1/4 inch).
• For details, refer to “Selecting a stitch”
(page 39).
f
Sew with the center of the presser foot
aligned along the center of the two pieces of
fabric.
g
After sewing is finished, remove the paper.
Decorative stitch
N 31
Decorative hemming on thin,
medium weight and plain weave
fabrics, heirloom stitching, etc.
5.0 (3/16)
1.5–7.0
(1/16–1/4)
2.0 (1/16)
1.5–4.0
(1/16–3/16)
No No Reinf.
N 32
Decorative stitching, smocking
stitching, heirloom stitching, etc.
6.0 (15/64)
1.5–7.0
(1/16–1/4)
1.6 (1/16)
1.0–4.0
(1/16–3/16)
No No Reinf.
N 33
Decorative stitching, smocking
stitching, heirloom stitching, etc.
5.0 (3/16)
1.5–7.0
(1/16–1/4)
1.6 (1/16)
1.0–4.0
(1/16–3/16)
No No Reinf.
● Be sure to turn off the main power before replacing the presser foot. Otherwise, injuries may occur if
the foot controller or (start/stop button) is accidentally pressed and the machine starts sewing.
Stitch Name
Pattern
Pre
sse
r Foot Pattern
No.
Application
Stitch Width
[mm (inch)]
Stitch Length
[mm (inch)]
Tw
in Nee
dle
W
alki
ng F
oot
R
eve
rs
e
(
Re
v.
)
/
Re
inf
orc
eme
nt
(
Re
in
f.
)
St
it
chi
ng
Auto
Manual
Auto
Manual
CAUTION
1
2
3