Brother DZ820E - Manual (Page 46)

44
EMBROIDERY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
c
Press the inner frame in from the top of the
fabric.
Line up
on the inner frame and on
outer frame.
d
Tighten the adjustment screw by hand just
enough to secure the fabric.
e
Gently remove the fabric from the frame
without loosening the adjustment screw.
Memo
z This precautionary step will help reduce
pattern distortion while embroidering.
f
Press the inner frame in from the top of the
fabric again, lining up
on the inner frame
and on outer frame.
a Outer frame
b Inner frame
c Fabric (right
side )
d Stabilizer material
e Ledge of outer frame
• Press down firmly until the inner frame is
securely pressed against the ledge of the
outer frame.
g
Tighten the adjustment screw while removing
any slack in the fabric by hand. The goal is to
have a drum-like sound when the stretched
fabric is struck lightly.
3
4 5
2 1