Brother MFC-J410W - Manual (Page 37)

Sending a fax
23
4
e
Press Black Start or Color Start.
Faxing from the ADF (MFC-J410W
only)
 The machine starts scanning the
document.
Faxing from the scanner glass
 If you press Black Start, the
machine starts scanning the first
page.
Do one of the following:
• To send a single page, press 2 to
choose No(Send) (or press
Black Start again).
The machine starts sending the
document.
• To send more than one page,
press 1 to choose Yes and place
the next page on the scanner
glass. Press OK. The machine
starts scanning the page. (Repeat
this step for each additional
page.)
 If you press Color Start, the
machine starts sending the
document.
Note
To cancel, press Stop/Exit.
Setting scanner glass size for
faxing
4
When documents are A4 size, you need to
set the Scan Size to A4. If you do not, the
bottom portion of the faxes will be missing.
a
Press (FAX).
b
Press a or b to choose
Glass ScanSize.
Press OK.
c
Press a or b to choose A4 (or Letter).
Press OK.
Note
• You can save the setting you use most
often by setting it as default. (See Setting
your changes as the new default in
chapter 3 in the Advanced User’s Guide.)
• This setting is only available for sending
documents from the scanner glass.
Color fax transmission
4
Your machine can send a color fax to
machines that support this feature.
Color faxes cannot be stored in the machine’s
memory. When you send a color fax, the
machine will send it in real time (even if
Real Time TX is set to Off).
Canceling a fax in progress
4
If you want to cancel a fax while the machine
is scanning, dialing or sending, press
Stop/Exit.