Brother PT-E550W - Manual (Page 41)


EDI
T
ING
A LABEL
41 Entering a Serialize Label
Press the OK or Enter key to display the screen that you set.
Example:
Advanced Serialize
 Simultaneous
Enter text.
Example: Create labels 1A-A01, 1A-B02, 1A-C03, 1A-D04
from 1A-A01 by using this function.
Press the Shift and Serialize keys and select "Simultaneous" by
using the or key and press the OK or Enter key.
Specify the first range of characters that you want to increase.
• To specify one character, use the , , or key to position
the cursor under the character and press the OK or Enter key
twice.
• To specify a range of characters, use the , , or key to
position the cursor under the first character in the range and
press the OK or Enter key. Then, position the cursor under the
last character in the range and press the OK or Enter key.
Example: Select 1 of A01.
Repeat step 3 to specify the second range of characters that you
want to increase.
Example: Select A of A01.
Select "Count" and "Incremented by" by using the or key and
set the value by using the or key.
Example: When you want to increase the number by one four
times, set "Count": 4, "Incremented by": 1.
5
• When you press the Serialize key, you can do the setting again. After redoing the setting,
the message "OK to Overwrite the Data after This Position?" is shown. If it's ok to
overwrite, press OK key.
• You can select All/Current/Range when printing as there are multiple pages of labels.
• To print labels refer to the User's Guide.
1
2
3
You cannot select the first character(s) because it is grayed out.
4
5