Brother HL-S7000DN - Manual (Page 34)

Troubleshooting
30
6
For DCP-8110DN, DCP-8150DN, DCP-8155DN, MFC-8510DN, MFC-8710DW, MFC-8810DW and
MFC-8910DW
6
a
Press Menu.
b
(For MFC models) Press a or b to choose Print Reports.
(For DCP models) Press a or b to choose Machine Info.
Press OK.
c
Press a or b to choose Network Config.
Press OK.
d Press Start.
For DCP-8250DN and MFC-8950DW(T)
6
a Press Menu.
b Press a or b to display Print Reports and then press Print Reports.
c Press Network Config.
d Press Start.
For HL-S7000DN
6
a Press Menu.
b Press a or b to choose Machine Info.
Press OK.
c Press a or b to choose Print NetSetting.
Press OK.
Note
If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try again.