Brother PR-650 650C - Manual

1
New Features of
PR-650 Version 2
The following new features have been added with version 2. Before using the machine, carefully
read both this manual and the Operation Manual included with your PR-650 machine (which
provides descriptions of Ver. 1).
■ The Link function has been added. (p. 1)
This function allows embroidery patterns edited in embroidery editing software provided with the Link
function, such as PE-DESIGN NEXT or later, to be transferred from a computer to multiple embroidery
machines. Please consult with your authorized dealer for exact machine specifications for linking.
■ The thread numbers for the displayed pattern from the .pes file imported into the embroidery machine
can be displayed as the thread numbers for the manufacturer specified from the machine. (p. 6)
■ The length of time until the embroidery machine will stop can be viewed in the embroidering screen.
(p. 7)
■ If the temporary needle bar setting has been applied, the icon ( ) indicating the selected needle bar
in the embroidering screen can now be viewed. (p. 7)
■ Additional characters have been added to several of the alphabet font patterns ( ). (p. 8)
Sending Embroidery Patterns From a Computer to the
Machine (Link Function)
Operations available with
the Link function
■ Send multiple embroidery patterns to
connected embroidery machines
As many as 100 embroidery patterns can be
transferred to an embroidery machine, and the
embroidering status of the patterns being
transferred can be viewed from the computer
monitor.
Use the included USB cable to connect the
embroidery machine to a computer.
■ Check the sewing status of the embroidery
machine (this model) from the computer
(Example of multiple machines connected)
Memo
● When connecting multiple embroidery
machines to the computer, use a
commercially available USB hub.
Please note that we recommend using a
self-powered USB hub. Do not use USB
extension cables or repeater cables. For
details on using the USB hub, refer to its
operating instructions.
EN