Brother MFC 6890CDW - Manual (Page 16)

16
Windows
® USB
18
Connect the USB cable
a
Lift the scanner cover into the open position.
b
Remove the USB label.
c
Connect the USB cable to the USB socket
marked with a
symbol. You will find the
USB socket inside the machine on the right as
shown below.
d
Carefully route the USB cable through the
trench and out the back of the machine as
shown below and connect the cable to your
computer.
e
Gently close the scanner cover using the finger
holds on both sides of it.
WARNING
Be careful not to trap your fingers under the
scanner cover.
Always use the finger holds provided on both
sides of the scanner cover when opening and
closing it.
Important
• DO NOT connect the machine to a USB port
on a keyboard or a non-powered USB hub.
• Connect the machine directly to your
computer.
LAN USB
Important
Make sure that the cable does not restrict the
cover from closing, or an error may occur.