Step 1 setting up the machine, 1 removing the protective parts, 2 loading paper – Brother DCP-120C User Manual

Page 6: Removing the protective parts loading paper, Step1, Setting up the machine, 1removing the protective parts, 2loading paper, Improper setup

background image

Setting Up the Machine

4

STEP1

1

1

Removing the protective

parts

1

Remove the protective tape and scanner glass
protection sheet.

Improper Setup

DO NOT connect the USB cable. Connecting
the USB cable is done during the software
installation process.

2

Loading paper

You can load up to 100 sheets of 20 lb
(80 g/m

2

) paper.

For details, see About paper in Chapter 1 of
the User’s Guide.

1

Pull the paper tray completely out of the
machine and remove the output paper tray.

2

Press and slide the paper guide (1) to fit the
paper width.

3

Pull out the paper support (1) and unfold the
paper support flap (2).

Note

Use the paper support flap for Letter, Legal and A4
paper.

11

1

2

See also other documents in the category Brother Printers: