Brother MFC-6490CW - Manual (Page 7)

7
5
Check the print quality
a
When the preparation process has finished, the
LCD shows this message
.
Press Color Start.
b
Check the quality of the four color blocks a on
the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press 1 (Yes)
on the dial pad to finish the quality check.
If you can see missing short lines, press 2 (No)
on the dial pad and go to
d.
d
The LCD asks you if the print quality is OK for
black and color. Press 1 (Yes) or 2 (No) on the
dial pad.
After pressing 1 (Yes) or 2 (No) for both black
and color, the LCD shows:
e
Press 1 (Yes), the machine will then start
cleaning the colors.
f
After cleaning is finished, press Color Start.
The machine starts printing the Print Quality
Check Sheet again. Go back to
b.
6
Choose your language
(If needed)
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Local Language.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.
Important
Make sure you put paper in the upper tray for
the initial setup.
OK OK
Poor Poor
Set Paper and Press
Start
11
Black OK?
Yes Press
Press
No
Start Cleaning?
Yes Press
Press
No