Advantech DVMB-554E - Manual (Page 59)

59
3.7.16 FDD, COM, LPT PORT
When Enabled, the system will resume from suspend mode if the
FDD, interface, COM port, or LPT port is active. The choices are
“Enabled” and “Disabled”.
3.7.17 PCI PIRQ [A-D]#
When Enabled, the system resumes from suspend mode if an
interrupt occurs. The choices are “Enabled” and “Disabled”.
3.7.18 PWRON After PWR-Fail
Use this to set up the system after power failure. The “Off” setting
keeps the system powered off after power failure, the “On” setting
boots up the system after failure, and the “Former-Sts” returns the
system to the status before power failure.