Advantech DVMB-554E - Manual (Page 54)

54
“Disabled”.
3.6.9 USB 2.0 Controller
This entry is to disable/enable the USB 2.0 controller only. The BIOS
itself may/may not have high-speed USB support. If the BIOS has
high speed USB support built in, the support will automatically turn
on when a high speed device is attached. The choices are “Enabled”
or “Disabled”.
3.6.10 USB Keyboard / Mouse Support
Select Enabled if you plan to use an USB keyboard. The choices are
“Enabled” and “Disabled”.
3.6.11 AC97 Audio
Select “Disable” if you do not want to use AC-97 audio. Options are
“Auto”, and “Disabled”.
3.6.12 Onboard LAN1 Control
Options are “Enabled” and “Disabled”. Select “Disabled” if you
don’t want to use onboard LAN controller1.
3.6.13 Onboard LAN2 Control
Options are “Enabled” and “Disabled”. Select Disabled if you don’t
want to use the onboard LAN controller2.
Note: Correct sequence of onboard Lan controllers(Lan1 & Lan2)
shows in the "Onboard Device" BIOS view.
3.6.14 Capture Controller
Options are “Normal Mode” and “Enhanced Mode”. Select Enhanced
Mode if you want to have more effective video capture performance.
Default setting is Normal Mode.
Note: DRAM default timings have been carefully
cho- sen and should ONLY be changed if
data is being lost. Please first contact
technical sup- port.
Super I/O Device:
3.6.15 Onboard Serial Port 1
The settings are “3F8/IRQ4”, “2F8/IRQ3”, “3E8/IRQ4”,
“2E8/IRQ3”, and “Disabled” for the on-board serial connector.
3.6.16 Onboard Serial Port 2
The settings are “3F8/IRQ4”, “2F8/IRQ3”, “3E8/IRQ4”,