Advantech DVMB-554E - Manual (Page 26)

26
1.12 Processor Installation
Warning: Without a fan or heat sink, the CPU will over-
heat and cause damage to both the CPU and
the single board computer. To install a CPU,
first turn off your system. Locate the processor
socket 479.
The DVMB-554E is designed for Intel Core™ 2 Duo/Core™
Duo/Core™ Solo (socket 479) up to 2.16 GHz. Follow these steps to
install the pro- cessor:
1. Turn the screw to loosen the processor socket.
2. Align the triangular marking on the processor with the small arrow
on the corner of the socket.
3. Turn the screw to its original position.
4. Install the heat sink on the CPU. The concave of heat sink should
face to location of capacitors to avoid contacting with capacitors.