Brother MFC-8690DW - Manual (Page 5)

5
3
Load paper in the paper
tray
a
Pull the paper tray completely out of the
machine.
b
While pressing the blue paper-guide release
lever
a , slide the paper guides to fit the paper
size you are loading in the tray. Make sure that
the guides are firmly in the slots.
c
Fan the stack of paper well to avoid paper jams
and misfeeds.
d
Put paper in the tray, and make sure that the
paper is below the maximum paper mark
a .
The side to be printed on must be face down.
e
Put the paper tray firmly back in the machine.
Make sure that it is completely inserted into the
machine.
f
Unfold the support flap a to prevent paper
from sliding off the face-down output tray.
Note
For Legal or Folio size paper, press the release
button
a in the bottom of the paper tray and then
pull out the back of the paper tray.
(Legal or Folio size paper are not available in
some regions.)
1
1 1
IMPORTANT
Make sure the paper guides touch the sides of
the paper so it will feed properly.
1
1