Brother Innov-is 2800D - Manual (Page 7)

5
ENGL
ISH
c
Place the fabric under the presser foot with
the needle at the starting point of the
stitching, and then press the “Start/Stop”
button. The machine will begin sewing.
d
Press the “Start/Stop” button to stop the
machine at the point where the sewing
direction changes.
→ The machine stops with the needle in the fabric, and
the presser foot is automatically raised.
e
Rotate the fabric, and then press the “Start/
Stop” button.
→ The presser foot is automatically lowered, and
sewing continues.
Automatic Fabric Sensor System
(Automatic Presser Foot Pressure)
The thickness of the fabric is automatically detected
and the presser foot pressure is automatically adjusted
with an internal sensor while sewing, so your fabric is
fed smoothly. The fabric sensor system works
continuously while sewing. This function is useful for
sewing over thick seams, or quilting.
a
Press .
→ The settings screen appears.
b
Set “AUTOMATIC FABRIC SENSOR SYSTEM”
to “ON”.
c
Press to return to the original screen.
Memo
If you press the “Start/Stop” button to pause sewing,
then press it again to continue.
Note
Your machine is not shipped with this feature turned
on. Please follow the instructions to activate this
feature.