Brother DCP-330C - Manual (Page 45)

Making copies
33
4
Setting your changes as new
default
4
You can save the copy settings for Quality,
Paper Type
, Brightness, Contrast and
Color Adjust
that you use most often by
setting them as the default settings. These
settings will stay until you change them again.
a
Press a or b to choose your new
setting.
Press OK.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press a
or b to choose Set New Default.
Press OK.
c
Press + to choose Yes.
d
Press Stop/Exit.
Restoring all the settings to
factory settings
4
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press a or b to choose
Factory Reset
.
Press OK.
b
Press + to choose Yes.
c
Press Stop/Exit.