beautypg.com

X 10.2.4 or greater), For network interface users (dcp-560cn only), For mac os – Brother DCP-350C User Manual

Page 27: Installing the driver & software, Macintosh, Important, Improper setup

background image

Installing the Driver & Software

25

Macintosh

®

Ma

c

int

os

h

®

Netw

o

rk

4

For Network Interface Users (DCP-560CN only)
(For Mac OS

®

X 10.2.4 or greater)

Important

Make sure that you have finished the
instructions from STEP 1 Setting Up the
Machine
on pages 4 through 11.

Note

• For Mac OS

®

X 10.2.0 to 10.2.3 users, upgrade to

Mac OS

®

X 10.2.4 or greater. (For the latest

information for Mac OS

®

X, visit

http://solutions.brother.com)

• Make sure there are no memory cards or a USB

Flash memory drive inserted into the media drives
or USB direct interface at the front of the machine.

1

Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.

2

Insert the network cable into the LAN socket
marked with a

symbol. You will find the

LAN socket inside the machine on the left as
shown below.

3

Carefully route the network cable through the
trench and out the back of the machine as
shown below.
Then, connect the cable to your network.

Improper Setup

Make sure that the cable does not restrict the
cover from closing, or an error may occur.

Note

If both USB and LAN cables are being used, guide
both cables through the trench with one on top of
the other.

4

Lift the scanner cover to release the lock .
Gently push the scanner cover support
down

and close the scanner cover .

5

Turn on the machine by connecting the power
cord.