Lcd display – Brother PT-E500 User Manual

Page 21



G STARTED

General Description

LCD Display

1. Line number

Indicates line number within the label

layout.

2. Shift Mode

Indicates shift mode is on.

3. Start Line / 4. End Line

The area between the start and end line

will be printed.
The short lines extending from the start/
end lines show the end of the label

layout.

5. Block Separator Line

Indicates the end of a block.

6. Cursor

Characters are entered to the left of the

cursor. Indicates the current data input
position.

7. Labeling Application Type

Indicates current labeling application

type.

8. Tape size

Indicates the tape size as follows for the

text entered:
Tape width x Label length
If the label length has been specified,

also appears on the right side of the tape
size.

9. Enter/Return symbol

Indicates the end of a line of text.

10. Battery Level

Indicates remaining battery level. It
displays only when using Li-ion battery.

11. Caps mode

Indicates that the Caps mode is on.

12.-16. Style guidance

Indicates the current font (12), character
size (13), character style (14), frame (15)
and alignment (16) settings.

The alignment guidance may not be
displayed depending on the selected
labeling application type.

17. Layout guidance

Indicates the orientation, layout,
separator, reverse, and repeated text
settings. The displayed items vary

according to the selected labeling
application type.

18. Cursor selection

Use the and keys to select menu

items and the and keys to change
the settings.

19. Specified line mark

Indicates that separate settings are

made for each line.

20. Lock mark

Indicates that some items cannot be
changed.

21. Counter

Indicates currently selected number/
selectable number.

22. Block Number

Indicates the block number.

13 14 15

Refer to "LCD Display" on page 31 for
changing.

-Full
-Half

-Low
-Empty