Brother DZ3000 - Manual (Page 79)

77
3
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
■ Adding new characters after sewing
After sewing a combination of characters, you
can add characters to the combination using the
following method.
Memo
● When you have finished sewing, the pattern
No. of the first character in the current
combination is shown on the LCD.
a
Press the utility stitch key. (Do not skip this
step.)
a Utility stitch key
b
(For models equipped with 1 font type of
character stitches)
Press the character stitch key and confirm that
the character stitch indicator is lit.
a Character stitch key
b Character stitch indicator
(For models equipped with 2 font types of
character stitches)
Press the character stitch key once or more
until the desired font type of character stitch
indicator is lit.
a Character stitch key
b Character stitch indicator (Gothic font)
c Character stitch indicator (Script font)
Note
● When you have chosen the script font,
confirm that the character stitch indicator
(Script font) is lit.
c
Add new characters by following the
procedure described in “Combining
characters” (page 76).
X New characters are added next to the
last character of the combination.
■ Making a new combination of characters after
sewing
Memo
● When you have finished sewing, the pattern
No. of the first character in the current
combination is shown on the LCD.
a
Select the first character of the new
combination.
b
Press the “+” side of (stitch width
adjustment key).
a Stitch width adjustment key
X The old combination of characters is
cleared from memory, and the pattern
No. shown in the LCD is entered as the
first character of a new combination.
c
Add characters by following the procedure
described in “Combining characters”
(page 76).